Warnings:
l Note that autimatic gate and door sustems must be installed exclusively by qualified
technical personnel in full compliance with statutory legislation.
l Before starting the installation procedure check that the values given in the "Technical
Specifications"chapter are compatible with the application.
l This product has been designed to control door openers, gate openers and similar
mechanisms.Any other use of the product will be considered improper. 1) Product description This is a dual channel transmitters that are activated only after having entered a Suitable combination. The units are designed for installation in indoor or outdoor locations. that ensures the utmost security because the transmitted code is changed at each transmission session. The estimated transmission range is 200 m in open space and 35 m indoors The units are designed to ensure battery life equivalent to an estimated 2 years of oper- ation considering 10 transmissions/day Audible signal status 1 short beep Keypad tone 1 long beep Modification of combination confirmed (or send the signal after enter the correct password ) 5 short beeps Error during combination input or combination edit operation 2 low beeps Battery low warning signal New batteries required
1) Installation
Before physically installing the it in their mouning position it is good practice to perform a practical test to assess their functionality and effective range.
Consider that range may be up to 25 or 30% less when battery power is low .
2.1) positioning
Apart from the distance from the receiver, the units should not be positioned in the vicinity of or-worsestill-in contact with metal structures, which could otherwise exert a signal shielding effect. Thanks to the enclosure protection rating of IP 54, the digital selectors can be installed outdoors if required.
